Hello!
Ask me any question about Lympik.
Please be as specific as possible so I can help you better.
Set up Wi-Fi and assign OCULUS
To view recordings from your Oculus device in the web app or to perform updates, the device must be connected to the internet. This connection is established via your smartphone.
When setting up the device for the first time, make sure your Wi-Fi network or smartphone hotspot is turned on. This allows the Oculus device to connect to the desired network, complete setup, and begin normal operation.
After enabling your hotspot, wait a few minutes. Then turn on your Oculus tracker by pressing and holding the button for 1–2 seconds. The device will begin blinking slowly in pink.
Next, press the button briefly to confirm that your desired network is available. The device will then start blinking yellow. A Wi-Fi network with the Oculus device’s serial number will appear in your smartphone’s Wi-Fi settings.
Select the network with the OCULUS device serial number to begin configuration.
After selecting your Oculus device’s serial number, a setup window will appear where you can enter your Wi-Fi details. You can either choose a network from the list and enter the password (if your Wi-Fi or hotspot is already active), or manually enter the network credentials (only one network is required). Then press Save.
This step only needs to be completed once per Oculus device as long as you continue using the same Wi-Fi network or smartphone hotspot to upload your data. If you switch to a different network, simply repeat this process.
To enter the Wi-Fi configuration again, please press and hold the power button until your device flashes yellow. The Wi-Fi network with the Oculus device’s serial number will then appear in your smartphone’s Wi-Fi settings and you can change the Wi-Fi network or hotspot.
Note: The default setting on some smartphones is that the Hot-Spot should switch off automatically after a certain time if no devices are connected. Your Oculus tracker only needs an internet connection to transfer data or for updates. During recording, Oculus is not connected to the wifi, which could cause the Wi-Fi on your smartphone to switch off.
If you are using an IPhone Hotspot, please make sure to activate "Maximise Compatibility" in your Hot-Spot settings:
Assign OCULUS to the athlete
Each Oculus must be assigned to an athlete before any data is recorded, to ensure that the data is assigned to the correct athlete immediately. To do this, go to 'Devices' in the app and start the assignment.
Click on the gear icon next to the desired Oculus device. You can either enter the email address of an athlete, or select a team member. The Oculus will then be assigned to this athlete immediately.
Please note that the athlete must have created a free profile on our web app app.lympik.com. When the Oculus Tracker is used with the Lympik timing system, athletes need to add identification to their profile, such as an NFC chip or lift card.
This assignment must be completed for each Oculus. You are then ready to start the recording.
This assignment will be stored in the app until it is changed or deleted. If you want to use an Oculus device for another athlete, remember to assign it to the correct athlete beforehand.