Hello!
Ask me any question about Lympik.
Please be as specific as possible so I can help you better.
Answers are AI-generated and may be inaccurate!
Putting devices into operation
After switching on the device by pressing the power button, your CHRONOS is in setup mode (setup trigger is shown on the display). This is suitable for the correct setting of the CHRONOS devices with the photocell and the start gate.
In setup mode, plug the photocell into one of the two ports on your CHRONOS . If the photocell is not set correctly, your CHRONOS will emit a continuous acoustic signal. After correct adjustment (as soon as the photocell is directed to the reflector) the acoustic signal stops and you can exit the setup mode with the green button.
The setup mode can also be used to test the start bar. To do this, plug the start bar into one of the two ports on your CHRONOS . When the bar is triggered, an acoustic signal is emitted as long as the bar is triggered. After successful testing of the start bar, simply switch back to the mode of Timing by pressing the green button. Once you have set up your devices, you can check the app in the track configuration to see if they are ready for the Timing .